CFD Letters received its first SJR (SCImago Journal Rank) in 2013. The journal is classified as Q3 in two subject categories: Fluid Flow and Transfer Processes | Modelling and Simulation. The 2y Cites per Doc metric (which is calculated using the same formula that Thomson Reuters' Impact Factor ™ uses is: 0.7.
Fluid flow and convective heat transfer over wall mounted cube have been studied numerically using Large Eddy Simulation. Surface of wall mounted cube and plane floor has a constant heat flux. Two subgrid scale models were used in this study; Wall-Adapting Eddy viscosity (WALE) and Dynamic Smagorinsky (DS).
The turbulent simulation of the droplet breakup shows the importance of the subgrid-scale turbulence modeling. One can clearly identify a stagnant low velocity zone in front of the droplet and a high velocity zone around the droplet. On the threshold between these two zones turbulence effects emerge resulting in the characteristic shape of the droplet during the breakup process at Weber numbers higher than 1000.
In the present paper, a numerical code has been developed with different turbulence models aiming at simulating turbulent bubbly flows in vertical circular pipes. The mass and momentum conservation equations are used to describe the motion of both phases (water/air).
RBF Based Grid-Free Local Scheme With Spatially Variable Optimal Shape Parameter For Steady Convection-Diffusion Equations
Effect of Swirl in a Constant Speed DI Diesel Engine Using Computational Fluid Dynamics
In the current work, the operating characteristics of direct injection diesel engine is studied using Extended Coherent Flame Model for 3 zones (ECFM-3Z) model in a CFD tool named es-ICE, an expert system for internal combustion engines. The present study is validated with the experimental work performed by Colin et. al.
CFD techniques were developed over the years with the hard way of trial and error, refine and many validation and assessment procedures. In the early 1973 the CFD group at Imperial College embarked on an ambitious and attractive program to predict simple shear flows, free and confined jet flows. The work was very intuitive…
Mentor Graphics will host What's New in FloEFD V17.0 and V17.1 on 15 February 2018 at 11am UK Time and 10am PST. Find out what’s new in FloEFD Version 17.0 and 17.1 that gives you more physics, capabilities and performance. Some of the big changes that have gone into the
NAFEMS will host How To Model Internal Flows in Engineering Systems on Tuesday January 23rd. This talk will introduce 1D Fluid System Simulation (System CFD) and show how it is used to analyse and design internal flow systems in complex fluid engineering. We will compare system techniques with 2D and
Flow Science is pleased to announce that the 2018 FLOW-3D European Users Conference will be held at Le Méridien Stuttgart Hotel in Stuttgart, Germany on May 14 – 16, 2018. The conference will be co-hosted by Flow Science Deutschland. We welcome FLOW-3D and FLOW-3D CAST users and those interested in learning more about the software to attend